Description

  • Angle Fastener 8 Zn, die-cast zinc, RAL 9006, white aluminum
  • 2 Button-Head Screws ISO 7380-M8x18, St, bright zinc-plated
  • 2 washers DIN 125-8.4, St, bright zinc-plated
  • T-Slot Nut 8 St M8, bright zinc-plated
  • a = 47.3 mm
  • b = 8.5 mm

Angle Fastener 8 40x40-45° - 0.0.677.56

The fast route to a stronger hold! Angle Fastener 8 40×40-45° enables you to build supporting braces at a 45° angle in next to no time. Simply screw an Angle Fastener into the core bore at the end face of any Profile 8 40×40, fasten it to the frame and that’s it – job done! Retrofitting is also an option and the profiles do not need to be mitred.
Angle Fastener 8 40×40-45° can also be used to build a whole truss.